-------------------------------------------------------------------------------- All 2000 News for NTIA/ITS HF Propagation Models (WINDOWS version) -------------------------------------------------------------------------------- 02 May 2000 1. A "to Clipboard" button was added to Method 11 & 28 circuit plots for ICEPAC & VOACAP. 23 May 2000 1. Some minor problems have been solved for Point-to-Point VOACAP when calculating multiple groups. It may have been unable to find the proper set of data to plot. That should work now. 2. Also, the previous version (00.0502) probably had fixed contours set for VOACAP DBU plots. That should be back to its original scaling using the maximum value. 05 June 2000 1. A problem was corrected in ICEPAC & VOACAP Point-to-Point when plotting parameters using the Run/Time option. 05 July 2000 1. VOACAP Point-to-Point did not function correctly when you specified a day-of-the-month when the RUN/GRAPH was selected. The results calculated would have been for URSI coefficients without the daily coefficients used. That has been corrected. 24 July 2000 1. I have increased the allowable SSN to be in the range 0-250. The previous limit of 200 was recently exceeded. 2. The zip code for our address has changed. Thus, all the ABOUT windows have been changed to reflect the new zip code of 80305. 26 July 2000 1. There were problems running VOACAP from the command line if you wanted to use the SILENT option so nothing is shown on the screen. That has now been fixed. It should function the same as ICEPAC as described in the 98_all.txt news file. 14 Aug 2000 1. These current modification to the HF propagation software should only be of use to VOA for their Planning software. Other broadcast administrations may be interested in these modifications when the software has been completed. It is currently in the development stage. 01 Sep 2000 1. These current modification to the HF propagation software should only be of use to VOA for their Planning software. Other broadcast administrations may be interested in these modifications when the software has been completed. It is currently in the development stage. Minor changes have been made to the general HF programs, but they should not be noticed by the normal user. 08 Sep 2000 1. The HELP files for IBB_PLAN have been completed. This should only affect users of IBB_PLAN which are the VOA and perhaps members of the HFCC. 04 Oct 2000 1. Saving a data file in ICEPAC that used METHOD 23 could not be OPENed and read. That has been fixed. 11 Nov 2000 1. Some Help files were left off previous installations. They have been added. 04 Dec 2000 1. A new SALFLIBC.DLL has been obtained from Salford. That is a file that gets put into your C:\WINDOWS\SYSTEM directory. Hopefully it causes no one problems. 2. You can now specify up to 16 character file names in the Area Coverage versions of the software. This will NOT work if you want to use the names in the COMBINE option, however. Someday that may be fixed. 3. Thanks to Brenton Vogelsang of Australia, the ICEPAC Technical Manual and old User's Manual have been converted to Word 7.0 format. That allowed us to also provide them in PDF format. These are available from the web site where you download the software. 4. At the request of our lawayers, a DISCLAIMER has been added to all the Help/About windows and in the README.TXT file. It is: ****************************************************************** Disclaimer: The software contained within was developed by an agency of the U.S. Government. NTIA/ITS has no objection to the use of this software for any purpose since it is not subject to copyright protection in the U.S. No warranty, expressed or implied, is made by NTIA/ITS or the U.S. Government as to the accuracy, suitability and functioning of the program and related material, nor shall the fact of distribution constitute any endorsement by the U.S. Government. ******************************************************************